Represents a Port under a particular gateway object or redundant group object.
vlan_range(Mandatory): VLAN Range of the Port. Format must conform to a-b,c,d-f where a,b,c,d,f are integers between 0 and 4095.
mtu: Port MTU (Maximum Transmission Unit) : The size in octets of the largest protocol data unit (PDU) that the layer can pass on. The default value is normally 1500 octets for Ethernet v2 and can go up to 9198 for Jumbo Frames.
name(Mandatory): Name of the Redundant Port
last_updated_by: ID of the user who last updated the object.
last_updated_date: Time stamp when this object was last updated.
permitted_action: The permitted action to USE/EXTEND this Redundant Port.
description: A description of the Redundant Port instance.
physical_name(Mandatory): Identifier of the Redundant Port. The name should be corresponding to the Physical Name of the ports belonging to this redundant instance.
embedded_metadata: Metadata objects associated with this entity. This will contain a list of Metadata objects if the API request is made using the special flag to enable the embedded Metadata feature. Only a maximum of Metadata objects is returned based on the value set in the system configuration.
infrastructure_profile_id: The ID of the infrastructure port profile this instance is associated with.
entity_scope: Specify if scope of entity is Data center or Enterprise level
port_peer1_id: Port ID of the port acting as master component of the redundant port instance.
port_peer2_id: Port ID of the port acting as slave component of the redundant port instance.
port_type(Mandatory): Type of the Redundant Port.
speed: Port Speed in Mb/s : Supported Ethernet speeds are 10 (10Base-T), 100 (Fast-ethernet 100Base-TX), 1000 (Gigabit Ethernet 1000Base-T), 10 000 (10 Gigabit Ethernet 10GBase-X), and Auto-Negotiate.
creation_date: Time stamp when this object was created.
use_untagged_heartbeat_vlan: A flag to indicate if for this redundant port an untagged heartbeat VLAN is to be used. If this is not set then will use the heartbeat VLAN set by the NS redundant group
use_user_mnemonic: Determines whether to use user mnemonic of the Port
user_mnemonic: User mnemonic of the Redundant Port.
associated_egress_qos_policy_id: ID of the Egress QoS Policy associated with this Redundant Port.
status: Status of the redundant port.
owner: Identifies the user that has created this object.
external_id: External object ID. Used for integration with third party systems