pat_enabled: Indicates whether PAT is enabled on the underlay for this uplink connection.
dns_address: DNS server address.
dns_address_v6: IPv6 DNS server address.
password: PPPoE password.
last_updated_by: ID of the user who last updated the object.
gateway: IP address of the gateway bound to the port
gateway_v6: IPv6 address of the gateway bound to the port.
address: IP address for static configuration
address_family: IP address family of this UplinkConnection
address_v6: IPv6 address for static configuration
advertisement_criteria: Advertisement Criteria for Traffic Flow
secondary_address: Secondary IP Address (Control IP Address) for Loopback.
netmask: Subnet mask of the uplink connection if mode is set to Static.
vlan: VLAN Id of this uplink
underlay_enabled: Indicated whether route to underlay is enabled on this uplink connection.
underlay_id: Underlay Identifier of underlay associated with this uplink.
inherited: This flag will determine if the abstract connection is inherited from the instance template
installer_managed: Boolean flag to indicate that connection parameters will be configured by the installer onsite. Limited to ConnectionMode: PPPoE
interface_connection_type: The way the interface is connected via the NSG. This value depends on if the interface internal or external to the NSG.
entity_scope: Specify if scope of entity is Data center or Enterprise level
mode: Specify how to connect to the network. Possible values: Dynamic (DHCP), Static (static configuration is required), PPPoE (pppoe configuration required), LTE (LTE configuration required). Default: Dynamic
role: To allow prioritisation of traffic, the NSG network ports must be configured with an uplink type or tag value which will be used in the identification of packets being forwarded. That identification is at the base of the selection of which network port will serve in sending packets to the outside world. The default value is PRIMARY. Possible values are PRIMARY, SECONDARY, TERTIARY, UNKNOWN,
role_order: Role order: Primary 1, Primary 2, Secondary 3. Note: Order will be calculated when all uplink connections fetched for gateway
port_name: Physical port name this uplink belongs to.
download_rate_limit: Download rate limit for this uplink in Mb/s.
uplink_id: ID that unqiuely identifies the uplink.
username: PPPoE username if uplink mode is set to PPPoE.
assoc_underlay_id: UUID of the underlay associated to the uplink.
associated_bgp_neighbor_id: UUID of BGP Neighbor associated to the Uplink which will be used for Bootstrap. This is mandatory if a secondaryAddress is defined.
associated_underlay_name: The display name of the Underlay instance associated with this uplink connection.
auxiliary_link: Make this uplink an auxiliary one that will only come up when all other uplinks are disconnected or can’t perform their role.
external_id: External object ID. Used for integration with third party systems