VPorts are a new level in the domain hierarchy, intended to provide more granular configuration than at subnet, and also support a split workflow, where the vPort is configured and associated with a VM port (or gateway port) before the port exists.
Enable Access Restriction
Default value: false
SDK attribute: accessRestrictionEnabled
Indicates if this vport is up or down
Format: free
SDK attribute: active
Indicates if address spoofing is ENABLED/DISABLED/INHERITED for this vport.
Allowed values: DISABLED, ENABLED, INHERITED
SDK attribute: addressSpoofing
UUID of the entity to which the vport is associated to. This could be UUID of a SUBNET or a L2DOMAIN
Format: free
SDK attribute: assocEntityID
UUID of the Egress Profile associated with this Vport entity.
Format: free
SDK attribute: associatedEgressProfileID
Id of Floating IP address associated to this VPort
Format: free
SDK attribute: associatedFloatingIPID
Associated gateway ID of VPort
Format: free
SDK attribute: associatedGatewayID
Personality of the associated Gateway
Allowed values: DC7X50, EVDF, EVDFB, HARDWARE_VTEP, NETCONF_7X50, NETCONF_THIRDPARTY_HW_VTEP, NSG, NSGBR, NSGDUC, NUAGE_210_WBX_32_Q, NUAGE_210_WBX_48_S, OTHER, SR_LINUX, UNMANAGED_GATEWAY, VDF, VDFG, VRSB, VRSG, VSA, VSG
SDK attribute: associatedGatewayPersonality
Associated gateway type of VPort.
SDK attribute: associatedGatewayType
UUID of the Ingress Profile associated with this Vport entity.
Format: free
SDK attribute: associatedIngressProfileID
The ID of the receive Multicast Channel Map this Vport is associated with. This has to be set when enableMultiCast is set to ENABLED
Format: free
SDK attribute: associatedMulticastChannelMapID
ID of Secondary Floating IP address associated to this vport.
Format: free
SDK attribute: associatedSecondaryFIPID
The ID of the send Multicast Channel Map this Vport is associated with. This has to be set when enableMultiCast is set to ENABLED
Format: free
SDK attribute: associatedSendMulticastChannelMapID
The UUID of the SSID Connection tied to this instance of a vPort.
Format: free
SDK attribute: associatedSSID
The trunk uuid associated with another vport of trunkRole PARENT_PORT. Can be specified only if trunkRole of this vport is SUB_PORT.
Format: free
SDK attribute: associatedTrunkID
Indicates if vport was auto created by the system
Default value: false
SDK attribute: autoCreated
Backhaul subnet VNID of the L3Domain associated with the VPort. This is exposed for Netconf manager
SDK attribute: backhaulSubnetVNID
The color encoded with a traffic engineering constraint such as minimum latency, hops, maximum bandwidth, etc. This is used for NFIX(Network Function Interconnect). Color is applicable only when associated Domain's Tunnel Type is MPLSoUDP. Valid range is 1 - 4294967295. If 0 is provided, color will be derived from the associated Domain.
Default value: 0
Max value: 4294967295
SDK attribute: color
Time stamp when this object was created.
SDK attribute: creationDate
Description for this vport
Format: free
SDK attribute: description
ID the Domain associated with the VPort
Format: free
SDK attribute: domainID
Name of the Domain associated with the VPort. This is exposed for Netconf manager
Format: free
SDK attribute: domainName
Service ID of Domain.
Format: free
SDK attribute: domainServiceLabel
Backhaul vlan id the L3Domain associated with the VPort. This is exposed for Netconf manager
SDK attribute: domainVLANID
determines whether or not deep packet inspection is enabled
Allowed values: DISABLED, ENABLED, INHERITED
Default value: INHERITED
SDK attribute: DPI
Metadata objects associated with this entity. This will contain a list of Metadata objects if the API request is made using the special flag to enable the embedded Metadata feature. Only a maximum of Metadata objects is returned based on the value set in the system configuration.
SDK attribute: embeddedMetadata
Specify if scope of entity is Data center or Enterprise level
Allowed values: ENTERPRISE, GLOBAL
SDK attribute: entityScope
Array of the embedded resource VPortInfo for each gateway member of ethernet segment group
SDK attribute: esGroupVPortInfos
External object ID. Used for integration with third party systems
Format: free
SDK attribute: externalID
Determines whether the default Overlay route will be ignored or not when a VM has FIP so that it takes Underlay route.
Allowed values: DISABLED, ENABLED, INHERITED
SDK attribute: FIPIgnoreDefaultRoute
Maximum number of data flows allowed for a VPort. If "Flow Limit Enabled" parameter is ENABLED/DISABLED/INHERITED, Flow Count parameter is configured/ignored/derived from parent domain respectively.
Min value: 1
Max value: 500000
SDK attribute: flowCount
Indicates if flow limit is enabled or disabled or "Flow Count" attribute is derived from the parent Domain on this VPort . Possible values are ENABLED, DISABLED or INHERITED.
Allowed values: DISABLED, ENABLED, INHERITED
Default value: INHERITED
SDK attribute: flowLimitEnabled
Committed flow setup rate in pps for this VPort. If Flow Setup Rate Limit parameter is ENABLED/DISABLED/INHERITED, flow setup rate parameter is configured/ignored/derived from parent domain respectively.
Default value: 1000
Min value: 1
Max value: 40000
SDK attribute: flowSetupRate
Indicates if flow setup rate limit is enabled or disabled or derived from parent Domain. Possible values are ENABLED, DISABLED or INHERITED.
Allowed values: DISABLED, ENABLED, INHERITED
Default value: INHERITED
SDK attribute: flowSetupRateLimitEnabled
Role of the gateway vport when handling MAC move errors
Allowed values: SECONDARY, TERTIARY
SDK attribute: gatewayMACMoveRole
Gateway portname eg: eth1 - applicable for type host/bridge
Format: free
SDK attribute: gatewayPortName
Indicates that this vport is eligible to be given in gateway vport config request. It becomes eligible when it has properly attached host or bridge interfaces.
Default value: false
SDK attribute: gwEligible
Indicates that this vport has attached interfaces
Format: free
SDK attribute: hasAttachedInterfaces
ID of the user who last updated the object.
Format: free
SDK attribute: lastUpdatedBy
Time stamp when this object was last updated.
SDK attribute: lastUpdatedDate
Indicates multicast policy on Vport.
Allowed values: DISABLED, ENABLED, INHERITED
SDK attribute: multicast
ID of the Multi NIC VPort associated with the VPort
Format: free
SDK attribute: multiNICVPortID
Name of the vport. Valid characters are alphabets, numbers, space and hyphen( - ).
Format: free
Min length: 1
Max length: 64
SDK attribute: name
Operational State of the VPort. Possible values are INIT, UP, DOWN, DEGRADED
Allowed values: DEGRADED, DOWN, INIT, UP
SDK attribute: operationalState
Identifies the user that has created this object.
Format: free
SDK attribute: owner
Operational state of the peer vport in multichassis lag scenario
Allowed values: DOWN, INIT, UP
SDK attribute: peerOperationalState
Indicates if this VPort is in routed mode. Applicable for Cisco 9K only.
Default value: false
SDK attribute: routed
The VLAN Number (1-4095), valid only if the trunkRole is SUB_PORT
Min value: 1
Max value: 4095
SDK attribute: segmentationID
The type of segmentation that is used. This must be VLAN for vports with trunkRole set to SUB_PORT. This can not be specified for a parent vport (trunkRole = PARENT_PORT)
Allowed values: VLAN
SDK attribute: segmentationType
The service ID used by the VSCs to identify the subnet associated with this vport
Format: free
SDK attribute: serviceID
VNID of the associated subnet or L2domain with the VPort. This is exposed for Netconf manager
SDK attribute: subnetVNID
Sub type of vport - possible values are NONE/VNF
Allowed values: NONE, VNF
Default value: NONE
SDK attribute: subType
Indicates what system it is.
Allowed values: HARDWARE, HARDWARE_VTEP, NUAGE_1, NUAGE_2, NUAGE_VRSG, SOFTWARE
SDK attribute: systemType
Indicates the role of the vport in trunking operations
Allowed values: PARENT_PORT, SUB_PORT
SDK attribute: trunkRole
Type of vport. Possible values are VM, HOST, BRIDGE, CONTAINER.
Allowed values: BRIDGE, CONTAINER, HOST, VM
SDK attribute: type
VLAN number of the associated VLAN of this vport - applicable for type host or bridge
SDK attribute: VLAN
UUID of the associated VLAN of this vport - applicable for type host or bridge
Format: free
SDK attribute: VLANID
ID the Zone associated with the VPort
Format: free
SDK attribute: zoneID