represents a application with L4/L7 classification
a unique 2 byte id generated when a application is created and used by VRS for probing.
SDK attribute: appId
associated Layer7 Application Type ID
Format: free
Max length: 255
SDK attribute: associatedL7ApplicationSignatureID
Minimum Failover Bandwidth of the application.
SDK attribute: bandwidth
description of Application
Format: free
Max length: 255
SDK attribute: description
destination IP in CIDR format
Format: cidr
SDK attribute: destinationIP
value should be either * or single port number
Format: free
Max length: 5
SDK attribute: destinationPort
DSCP match condition to be set in the rule. It is either * or from 0-63.
Format: free
SDK attribute: DSCP
Enable the performance probe for this application
Default value: false
SDK attribute: enablePPS
Ether type of the packet to be matched. etherType can be * or a valid hexadecimal value
Format: free
SDK attribute: etherType
name of the application
Format: free
Min length: 1
Max length: 255
SDK attribute: name
one way Delay
Max value: 9999
SDK attribute: oneWayDelay
one way Jitter
Max value: 9999
SDK attribute: oneWayJitter
one way loss
SDK attribute: oneWayLoss
with values being Latency, Jitter, PacketLoss
Allowed values: JITTER, LATENCY, PACKETLOSS
SDK attribute: optimizePathSelection
Describes the trigger for the application.
Allowed values: CONTINUOUS, FIRST_PACKET, FIRST_PACKET_AND_CONTINUOUS
Default value: FIRST_PACKET
SDK attribute: performanceMonitorType
default set to any , possible values primary/secondary/any
Allowed values: ANY, PRIMARY, SECONDARY
Default value: ANY
SDK attribute: postClassificationPath
default set to primary , possible values primary/secondary
Allowed values: DEFAULT, PRIMARY, SECONDARY
Default value: DEFAULT
SDK attribute: preClassificationPath
Protocol number that must be matched
Allowed values: NONE, TCP, UDP
Default value: NONE
SDK attribute: protocol
determines whether this entity is read only. Read only objects cannot be modified or deleted.
Default value: false
SDK attribute: readOnly
source IP address
Format: free
SDK attribute: sourceIP
source Port ,value should be either * or single port number
Format: free
Max length: 5
SDK attribute: sourcePort
Maintain path symmetry during SLA violation
Default value: false
SDK attribute: symmetry