Represents a Port under a particular gateway object or redundant group object.
This object has no members.
ID of the Egress QOS Policy associated with this Vlan.
Format: free
SDK attribute: associatedEgressQOSPolicyID
A description of the Port
Format: free
Max length: 255
SDK attribute: description
Specify if scope of entity is Data center or Enterprise level
Allowed values: ENTERPRISE, GLOBAL
Format: free
SDK attribute: entityScope
External object ID. Used for integration with third party systems
Format: free
SDK attribute: externalID
The ID of the infrastructure profile this instance is associated with.
Format: free
SDK attribute: infrastructureProfileID
ID of the user who last updated the object.
Format: free
SDK attribute: lastUpdatedBy
Port MTU (Maximum Transmission Unit) : The size in octets of the largest protocol data unit (PDU) that the layer can pass on. The default value is normally 1500 octets for Ethernet v2 and can go up to 9198 for Jumbo Frames.
Default value: 1500
Min value: 68
Max value: 9198
SDK attribute: MTU
Name of the Port
Format: free
Min length: 1
Max length: 255
SDK attribute: name
The permitted action to USE/EXTEND this Gateway.
Allowed values: ALL, DEPLOY, EXTEND, INSTANTIATE, READ, USE
SDK attribute: permittedAction
Identifier of the Port
Format: free
Min length: 1
Max length: 255
SDK attribute: physicalName
The master gateway peer port id.
Format: free
SDK attribute: portPeer1ID
The slave gateway peer port id.
Format: free
SDK attribute: portPeer2ID
Type of the Port.
Allowed values: ACCESS, NETWORK
SDK attribute: portType
Port Speed in Mb/s : Supported Ethernet speeds are 10 (10Base-T), 100 (Fast-ethernet 100Base-TX), 1000 (Gigabit Ethernet 1000Base-T), 10 000 (10 Gigabit Ethernet 10GBase-X), and Auto-Negotiate.
Allowed values: AUTONEGOTIATE, BASE10, BASET1000, BASETX100, BASEX10G
SDK attribute: speed
Status of the port.
Allowed values: INITIALIZED, MISMATCH, ORPHAN, READY
SDK attribute: status
user mnemonic of the Port
Format: free
Max length: 255
SDK attribute: userMnemonic
A flag to indicate if for this redundant port an untagged heartbeat VLAN is to be used. If this is not set then will use the heartbeat VLAN set by the NS redundant group
Format: free
SDK attribute: useUntaggedHeartbeatVlan
determines whether to use user mnemonic of the Port
Format: free
SDK attribute: useUserMnemonic
VLAN Range of the Port. Format must conform to a-b,c,d-f where a,b,c,d,f are integers between 0 and 4095.
Format: free
Max length: 255
SDK attribute: VLANRange